· 第十二届中国国际胶粘剂及密封剂展览会
· 缩短α-氰基丙烯酸酯胶粘剂固化时间的研
· 德国胶粘剂公司推出新的质量保证解决方
· 2010年中国热熔胶销售额或达34亿美元
· 先进纤维增强树脂基复合材料在航空航天
· 室温硫化胶层建模在透镜结构分析中的应
复合材料热熔胶
 
 

STRANGE168热熔胶 

 简要概述

      STRANGE168热熔胶是强粘接力的反应型聚氨酯热熔胶;适用于汽车工业、航空航天、民用建筑等领域;金属、碳纤维、玻璃钢、塑料、复合材料、木材等之间的粘接、 复合;

 

性能特征

环保无毒害,不含任何溶剂;

优良的粘接性能;

没有任何气味;

防水性能好;

即使在极端的环境里也能表现出良好的性能;

抗老化性能好;

热稳定性好;

 

技术指标

化学成分:聚氨酯

固含量:100%

粘度::12000±2,500cps/120

有效使用时间:在30,以15-20/平方英尺的涂胶量,有效工作时间为10-15分钟

耐环境温度:-50-130

 

应用说明

1.涂胶后的有效使用时间与胶液温度、操作环境温度、粘接材料的导热性能及材料的本身温度有密切关系。

2.当在粘接材料的湿度高及温度低时,或操作环境温度低时,涂胶后有效使用时间将减少;反之,其有效工作时间将增加。

3.涂胶前,将胶桶预热至120

4.通常用量为15-20/平方英尺,涂胶机使用温度为120

5.固化速度取决于涂胶的厚度、环境温度、材料的湿度和材料的渗透性。

 

包装规格

净重:20加仑、50加仑、200加仑

 

安全措施

       保持工作环境通风,妥善皮肤保护及戴防护眼镜。若皮肤上粘有本品,可用水及肥皂清洗,若眼睛里进入该品则以大量水冲洗,严重者就医。

 

储存

12个月有效期(21)存储在密闭的容器内。使用后请立即将盖子盖好,保证其密封性。

A brief overview ofIs strong

            STRANGE168 hot melt adhesive stick relay of reactive polyurethane hot melt adhesive; Applicable to the automotive industry, aerospace, civil construction and other fields; Metals, carbon fiber, glass fiber reinforced plastic, plastic, composite materials, wood adhesive, composite between;

Performance characteristics

 Environmental protection non-toxic, does not contain any solvents;

 Excellent bonding performance;

No smell;

  Waterproof properties is good;

   Even in extreme environment can show the good performance;

    Good anti-aging performance;

   Good thermal stability;

    Technical indicators

    Chemical composition: polyurethane

   Solid content: 100%

Viscosity: : 12000 + 2500 CPS / 120 ℃

Effective use of time: in 30 ℃ to 15 to 20 grams/square feet of glue quantity, effective work for 10 to 15 minutes

Environmental temperature: - 50 ℃ to 130 ℃

Application shows that

1. The effective use of time after coating and adhesive solution temperature, the temperature of operational environment, the performance of thermal conductivity of adhesive material and the material itself temperature has a close relationship.

2. When the adhesive materials and at low temperature, high humidity or operating environment temperature is low, the coating will reduce the effective use of time after; On the other hand, the effective working time will increase.

Before 3. Glue, the glue barrel preheat to 120 ℃.

4. Commonly used for 15 to 20 grams/square feet, glue machine using temperature is 120 ℃.

5. The curing speed depends on the thickness of the coating, environmental temperature, material moisture, and the permeability of the material.

Packing specification

Net weight: 20 gallons, 50 gallons, 200 gallons

Security measures

Keep the working environment and ventilation, properly protect skin and wear protective glasses. If skin with this product, can wash with water and soap, if the eyes into the goods with a large number of water flushing, serious medical treatment.

storage

Valid for 12 months (21 ℃) is stored in an airtight container. Immediately after using the lid well, ensure the tightness.

 


网站备案号:京ICP备17010398号